1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 a di men si ons: [mm] l 0. 05 w 0. 05 h 0. 05 e +0. 05/ - 0. 10 l p w 1. 0 0. 5 0. 5 0. 25 1. 50 0. 50 0. 50 b re com men ded land pat tern: [mm] c sche ma tic: d1 elec tri cal pro per ties: pro per ties ca pa ci tan ce ra ted vol ta ge dis si pa ti on fac tor iso la ti on re si stan ce test con di ti ons 10. 2 vrms, 1 mhz 10% 10. 2 vrms, 1 mhz 10% ap p ly u r for 120 s max. c u r df r iso va lue 3. 3 16 q 400 + 20 c 10 unit pf v (dc) g tol. 0. 5 pf max. typ. pre con di ti on for class ii mlcc mea su re ment: ap p ly a pre he at treat ment @15010c for 1 hour. the mea su re ment should be ap p lied af ter 242 hrs the part was sto red un der am bient con di ti ons. the re is not any pre con di ti on ne ces sa ry for class i mlcc. e ge ne ral in for ma ti on: ge ne ral pur po se mlcc cera mic ty pe: tem pe ra ture co ef fe cient: sto ra ge con di ti ons: ope ra ting tem pe ra ture: diel ec tric strength: ge ne ral test con di ti ons: fit ac cor ding to np0 class i 30 ppm max. 35c, <45% rh - 55 c bis +125 c 5 sec. @250% u r ; char ge & dischar ge cur rent < 50ma 25c, 30- 70% rh; if not spe ci fied dif fe rent ly se pa ra te do cu men ta ti on this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 d2 me cha ni cal pro per ties: pro per ties ad he si ve strength of ter mi na ti on vi bra ti on re si stan ce re si stan ce to sol der he at de fi ni ti on 0402 & 0603 > 0603 sol der tem pe ra ture dip ping ti me spe ci fic 10 1 sec; 5n 10 1 sec; 10n all 3 di rec ti ons, 2 hours each @ 10 - 55 - 10 hz, am pli tu de 0. 75 mm or 10 g 260c 5c 10 1 sec re fer to sol de ring pro fi le this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 h1: clas si fi ca ti on re flow pro fi le for smt com po n ents: h2: clas si fi ca ti on re flow pro fi les pro fi le fea ture pre he at - tem pe ra ture min (t smin ) - tem pe ra ture max (t smax ) - ti me (t s ) from (t smin to t smax ) ramp- up ra te (t l to t p ) li qui dous tem pe ra ture (t l ) ti me (t l ) main tai ned abo ve t l peak packa ge bo dy tem pe ra ture (t p ) ti me wi thin 5c of ac tu al peak tem pe ra ture (t p ) ramp- down ra te (t p to t l ) ti me 25c to peak tem pe ra ture pb- free as sem b ly 150c 200c 60- 120 se conds 3c/ se cond max. 217c 60- 150 se conds see ta ble h3 20- 30 se conds 6c/ se cond max. 8 mi nu tes max. re fer to ipc/ je dec j- std- 020d h3: packa ge clas si fi ca ti on re flow tem pe ra ture pb- free as sem b ly pb- free as sem b ly pb- free as sem b ly packa ge thick ness < 1. 6 mm 1. 6 - 2. 5 mm 2. 5 mm vo lu me mm3 <350 260c 260c 250c vo lu me mm3 350 - 2000 260c 250c 245c vo lu me mm3 >2000 260c 245c 245c re fer to ipc/ je dec j- std- 020d h sol de ring spe ci fi ca ti ons: this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 1. ge ne ral ? the ca pa ci tor is en gi nee red, de si gned and ma nu fac tu red to be used wi thin the da tas heet spe ci fied va lues. ? do not use the ca pa ci tor neit her short term nor long term out si de the spe ci fied va lues, which are gi ven in the da ta sheet. ? do not ap p ly any kind of fle xu ral or com pres si ve for ce on to sol de red or un sol de red com po nent. ? pre vent the ca pa ci tor sur face from any da ma ge or scrat ches with sharp ed ges (e. g. chas sis, screw dri vers, pin cers) 2. pro duct spe ci fic the re spon si bi li ty for the ap p li ca bi li ty of cu sto mer spe ci fic pro ducts and use in a par ti cu lar cu sto mer de sign is al ways wi thin the au t ho ri ty of the cu sto mer. all tech ni cal spe ci fi ca ti ons for stan dard pro ducts do al so ap p ly to cu sto mer spe ci fic pro ducts. fol low all in struc ti ons men tio ned in the da ta sheet, espe ci al ly the fol lo wi ng items: 2. 1 sto ra ge con di ti ons ? the se cera mic ca pa ci tors must be sto red in sta ble con di ti ons wi thin an am bient tem pe ra ture bet ween 5c to 40c with a re la ti ve hu mi- di ty of <70%. ? the en vi ron ment in which the ca pa ci tors are ope ra ted and sto red has to ha ve at mo s phe ric cha rac te ri stics and must be free of dew con- den sa ti on and to xic ga ses (e. g. chlo ri ne, am mo nia, sul fur, hy dro gen sul phi de and hy dro gen sul fa te). ? all pro ducts shall be used be fo re the end of the pe ri od of 12 months ba sed on the pro duct da te co de, if not, a 100% sol de ra bi li ty can not be gua ran teed. ? the ca pa ci tan ce to le ran ce as spe ci fied wi thin the da tas heet is on ly va lid on the da te of de li ve ry. 2. 2 ope ra ting cli ma tic con di ti ons ? do not ex ceed the lower nor the up per spe ci fied tem pe ra ture un der no con di ti on. ? be awa re that the spe ci fied ca pa ci tan ce to le ran ce is on ly va lid at the da te de li ve ry and ac cor ding spe ci fied mea su re ment cri te ria. ? do not use the ca pa ci tors un der high hu mi di ty, high tem pe ra ture nor un der high or low at mo s phe ric pres su re which may af fect ca pa ci tors re lia bi li ty. ? sur face tem pe ra ture in clu ding self- hea ting must be kept be low the ma xi mum ope ra ting tem pe ra ture. ? the tem pe ra ture ri se of the capacitors tem pe ra ture com pa red to am bient tem pe ra ture shall be be low 20c. ? avo id any wa ter or hea vy dust on ca pa ci tors sur face, which may cau se elec tri cal lea ka ge, da ma ge, over hea ting or cor ro si on. 2. 3 ope ra ting load con di ti ons ? do not use the ca pa ci tor with any hig her than spe ci fied vol ta ge. ? vio la ti on of the tech ni cal pro duct spe ci fi ca ti ons such as ex cee ding the spe ci fied vol ta ge will vo id the war ran ty. ? ope ra ting vol ta ge across the ter mi nals in clu ding ac and dc peaks and ac or pul se overs hoo ting, vp- p as well as ir re gu lar vol ta ge be cau- se of re so nance or swit ching must be be low the ra ted vol ta ge. ? due to self- hea ting the re lia bi li ty of the ca pa ci tor may be re du ced, if high fre quen cy ac or pul se is ap p lied. ? avo id any over load or con di ti ons that are not spe ci fied in the ca pa ci tors da tas heet. ? con si der care ful ly pos si ble spe ci fic chan ges of elec tri cal cha rac te ri stics li ke ca pa ci tan ce over tem pe ra ture, vol ta ge and ti me as well as the spe ci fic per for man ce over fre quen cy for the ac tu al use con di ti ons. for de tai led in for ma ti on see da tas heet. 2. 4 de sign of the p. c. board ? the chip ca pa ci tor shall be lo ca ted to mi ni mi ze any pos si ble me cha ni cal stress from de flec ti on or board wrap. ? it is re com men ded to po si ti on the chip ca pa ci tor in par al lel to slits and per fo ra ti ons and as far away from slits, per fo ra ti ons, se pa ra ti on points, screw ho les, fra mes and ed ges of the p. c. board to avo id me cha ni cal stress. ? de ter mi ne the sha pe and si ze of the sol der pads to ha ve pro per amount of sol der on the ter mi na ti ons as the amount of sol der at the ter- mi na ti ons has a di rect ef fect on the re lia bi li ty of the ca pa ci tor. ? pro vi de in di vi du al sol der pads for each ter mi na ti on. sol der pads are spe ci fied in the da tas heet. ? the pcb de sign (e. g. land pat tern de sign and groun ding pla nes) must be eva lua ted for each in di vi du al cir cuit to achie ve the op ti mal sol- de ring re sults. 2. 5 moun ting ? avo id any stress from the moun ting head to avo id cracks. ? ad just the bot tom dead cen ter of the moun ting head not to press on the p. c. board sur face. ? the moun ting head pres su re has to be ad ju sted to 1 n up to 3 n of sta tic for ce. ? pro vi de sup port from the bot tom si de of the p. c. board by a sup port pin for mi ni mi zing the im pact ener gy from the moun ting head. ? pro vi de suf fi cient clo se up di men si on, pre ven ti ve main te nance and re pla ce ment of the cen te ring jaw to avo id a crack when it is worn out. 2. 6 ad he si ve se lec ti on of ad he si ve ? the ad he si ve should ha ve suf fi cient coa ting and vis co si ty and should har den ra pid ly. ? the ad he si ve should be strong enough to hold parts on the board du ring the moun ting and sol der pro cess and should ha ve suf fi cient strength at high tem pe ra tu res. ? the ad he si ve should ha ve cor ro si on re si stan ce, ex cel lent in su la ti on cha rac te ri stics and no emis si on of to xic gas ses nor any ef fect on the hu man bo dy. ? do not use too much ad he si ve to avo id pol lu ti on of the sol de ring pads. i cau ti ons and war nings: the fol lo wi ng con di ti ons ap p ly to all goods wi thin the pro duct se ries of wcap- cs gp of wrth elek tro nik ei sos gmbh & co. kg: this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 2. 7 sol de ring ? the de tai led sol de ring in struc ti ons for re flow and wa ve sol de ring are gi ven wi thin sol de ring spe ci fi ca ti on in the da tas heet. ? the sol de ring pro fi le has to be com pli ant with the tech ni cal sol de ring spe ci fi ca ti on, other wi se this will vo id the war ran ty. ? avo id any other than spe ci fied tem pe ra ture and / or ti me con di ti ons du ring sol de ring. ? cu sto mer needs to en su re that the ap p lied sol der pa ste, the pa ste thick ness and sol der con di ti ons are ap p li ca ble to gua ran tee a suf fi cient sol der re sult ac cor ding to the re le vant cri te ria of ipc- a- 610. ? ex ces si ve amount of sol der may lead to hig her ten si le for ce and chip cracking. in suf fi cient amount of sol der may de tach the ca pa ci tor due to de fec ti ve con tacts. ? do not use ex ces si ve nor in suf fi cient flux. ? pro vi de enough wa shing when wa ter- so lu ble flux is used. ? con si der the pre hea ting con di ti ons as fol lows to avo id ther mal shock: sol de ring si ze tem pe ra ture dif fe rence (t) wa ve sol de ring 0603, 0805 t 150c re flow sol de ring 1206 or less t 190c re flow sol de ring 1210 or mo re t 130c ma nu al sol de ring 1206 or less t 190c ma nu al sol de ring 1210 or mo re t 130c ? it is re com men ded to use air for na tu ral coo ling. when dip ping the chips in to a sol vent for clea ning, the tem pe ra ture dif fe rence (?t) must be less than 100c. ? for re flow sol de ring two ti mes li mi ta ti on is re com men ded. ? wa ve sol de ring is re com men ded on ly for the fol lo wi ng ca se si zes: 0603 and 0805, thick ness< 1mm. ? plea se en su re for ma nu al sol de ring (sol der iron) not to ex ceed the ge ne ral tem pe ra ture ca pa bi li ties as spe ci fied abo ve. ? the fol lo wi ng con di ti ons are re com men ded for sol der re pair by sol der iron: si ze temp. (c) pre hea ting temp. (c) tem pe ra ture dif fe rence (t) at mo s phe re 1206 or less 330 20c >150c t 190c room air 1210 or mo re 280c max >150c t 130c room air ? ty pi cal ti me of ac tu al peak tem pe ra ture: <5 sec (300c), <3 sec (350c); as short as pos si ble ? do not ma ke di rect con tact with the cera mic diel ec tric. 2. 8 clea ning ? clea ning agents that are used to clean the cu sto mer ap p li ca ti on might da ma ge or change the cha rac te ri stics of the com po nent, bo dy, pins or ter mi na ti on. ? avo id ha lo gen in the flux or any con ta mi na ted flux as well as ex ces si ve ly high ul tra so nic clea ning. 2. 9 coa ting, mol ding and pot ting of the p. c. board ? when coa ting and mol ding the p. c. board ve rify the qua li ty in flu ence on the ca pa ci tor. ? ve rify the cu ring tem pe ra ture and as su re that the re is no harm ful de com po sing or re ac ti on gas emis si on du ring cu ring. ? do not ex ceed the ma xi mal tem pe ra ture ri se of 20c. ? if the pro duct is pot ted in cu sto mer ap p li ca ti ons, the pot ting ma te ri al might shrink du ring and af ter har de ning. the pro duct is ex po sed to the pres su re of the pot ting ma te ri al with the ef fect that the bo dy and ter mi na ti on is pos si b ly da ma ged and so the elec tri cal as well as the me cha ni cal cha rac te ri stics are en dan ge red to be af fec ted. af ter the pot ting ma te ri al is cu red, the bo dy and ter mi na ti on of the pro duct ha- ve to be checked if any re du ced elec tri cal or me cha ni cal fun c ti ons or de struc ti ons ha ve oc cur red. 2. 10 hand ling af ter chip is moun ted ? di rect me cha ni cal im pact to the pro duct shall be pre ven ted. ? af ter sol de ring plea se pay at ten ti on not to bend, twist or dis tort the p. c. board in hand ling and sto ra ge. ? avo id ex ces si ve pres su re du ring the fun c tio nal check of the p. c. board. ? avo id ben ding stress whi le brea king the p. c. board. 2. 11 hand ling of loo se chip ca pa ci tor ? on ce drop ped do not use the chip ca pa ci tor. ? af ter moun ting avo id pi ling up p. c. boards to avo id hit ting the chip ca pa ci tor of ano ther board. i cau ti ons and war nings (2): the fol lo wi ng con di ti ons ap p ly to all goods wi thin the pro duct se ries of wcap- cs gp of wrth elek tro nik ei sos gmbh & co. kg: this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
1. 0 rev 2014- 11- 10 da te sst by psl checked wrth elek tro nik ei sos gmbh & co. kg emc & in duc ti ve so lu ti ons max- eyth- str. 1 74638 wal den burg ger ma ny tel. +49 (0) 79 42 945 - 0 www. we- on li ne. com eisos@we- on li ne. com de s crip ti on wcap- csgp ceramic capacitors or der. - no. 885012005022 si ze a4 si ze: 0402 1. ge ne ral cu sto mer re spon si bi li ty so me goods wi thin the pro duct ran ge of wrth elek tro nik ei sos gmbh & co. kg con tain state ments re gar ding ge ne ral sui ta bi li ty for cer tain ap p li ca ti on are as. the se state ments about sui ta bi li ty are ba sed on our know led ge and ex pe ri ence of ty pi cal re qui re ments con cer ning the are- as, ser ve as ge ne ral gui dance and can not be esti ma ted as bin ding state ments about the sui ta bi li ty for a cu sto mer ap p li ca ti on. the re spon si bi- li ty for the ap p li ca bi li ty and use in a par ti cu lar cu sto mer de sign is al ways so le ly wi thin the au t ho ri ty of the cu sto mer. due to this fact it is up to the cu sto mer to eva lua te, whe re ap pro pria te to in ve sti ga te and de ci de whe ther the de vi ce with the spe ci fic pro duct cha rac te ri stics de s cri bed in the pro duct spe ci fi ca ti on is va lid and sui ta ble for the re spec ti ve cu sto mer ap p li ca ti on or not. 2. cu sto mer re spon si bi li ty re la ted to spe ci fic, in par ti cu lar sa fe ty- re le vant ap p li ca ti ons it has to be clear ly poin ted out that the pos si bi li ty of a mal fun c ti on of elec tro nic com po n ents or fai lu re be fo re the end of the usu al li fe ti me can- not be com ple te ly eli mi na ted in the cur rent state of the art, even if the pro ducts are ope ra ted wi thin the ran ge of the spe ci fi ca ti ons. in cer tain cu sto mer ap p li ca ti ons re qui ring a ve ry high le vel of sa fe ty and espe ci al ly in cu sto mer ap p li ca ti ons in which the mal fun c ti on or fai lu re of an elec tro nic com po nent could en dan ger hu man li fe or he alth it must be en su red by most ad van ced tech no lo gi cal aid of sui ta ble de sign of the cu sto mer ap p li ca ti on that no in ju ry or da ma ge is cau sed to third par ties in the event of mal fun c ti on or fai lu re of an elec tro nic com po nent. the re fo re, cu sto mer is cau tio ned to ve rify that da ta sheets are cur rent be fo re pla cing or ders. the cur rent da ta sheets can be dow n loa ded at www. we- on li ne. com. 3. best care and at ten ti on any pro duct- spe ci fic no tes, cau ti ons and war nings must be strict ly ob ser ved. any dis re gard will re sult in the loss of war ran ty. 4. cu sto mer sup port for pro duct spe ci fi ca ti ons so me pro ducts wi thin the pro duct ran ge may con tain sub stan ces which are sub ject to re stric ti ons in cer tain ju ris dic ti ons in or der to ser ve spe- ci fic tech ni cal re qui re ments. ne ces sa ry in for ma ti on is availa ble on re quest. in this ca se the field sa les en gi neer or the in ter nal sa les per son in char ge should be con tac ted who will be hap py to sup port in this mat ter. 5. pro duct r&d due to con stant pro duct im pro ve ment pro duct spe ci fi ca ti ons may change from ti me to ti me. as a stan dard re por ting pro ce du re of the pro duct change no ti fi ca ti on (pcn) ac cor ding to the je dec- stan dard in form about mi nor and ma jor chan ges. in ca se of fur ther que ries re gar ding the pcn, the field sa les en gi neer or the in ter nal sa les per son in char ge should be con tac ted. the ba sic re spon si bi li ty of the cu sto mer as per sec ti- on 1 and 2 re mains un af fec ted. 6. pro duct li fe cy cle due to tech ni cal pro gress and eco no mi cal eva lua ti on we al so re ser ve the right to dis con ti nue pro duc ti on and de li ve ry of pro ducts. as a stan- dard re por ting pro ce du re of the pro duct ter mi na ti on no ti fi ca ti on (ptn) ac cor ding to the je dec- stan dard we will in form at an ear ly sta ge about in e vi ta ble pro duct dis con ti nu an ce. ac cor ding to this we can not gua ran tee that all pro ducts wi thin our pro duct ran ge will al ways be availa ble. the re fo re it needs to be ve ri fied with the field sa les en gi neer or the in ter nal sa les per son in char ge about the cur rent pro duct availa bi li ty ex- pec tan cy be fo re or when the pro duct for ap p li ca ti on de sign- in dis po sal is con si de red. the ap proach na med abo ve does not ap p ly in the ca se of in di vi du al agree ments de via ting from the fo re going for cu sto mer- spe ci fic pro ducts. 7. pro per ty rights all the rights for con trac tu al pro ducts pro du ced by wrth elek tro nik ei sos gmbh & co. kg on the ba sis of ideas, de ve lop ment con tracts as well as mo dels or tem pla tes that are sub ject to co py right, pa tent or com mer ci al pro tec ti on sup plied to the cu sto mer will re main with wrth elek tro nik ei sos gmbh & co. kg. wrth elek tro nik ei sos gmbh & co. kg does not war rant or re pre sent that any li cen se, eit her ex pres sed or im plied, is gran ted un der any pa- tent right, co py right, mask work right, or other in tel lec tu al pro per ty right re la ting to any com bi na ti on, ap p li ca ti on, or pro cess in which wrth elek tro nik ei sos gmbh & co. kg com po n ents or ser vices are used. 8. ge ne ral terms and con di ti ons un less other wi se agreed in in di vi du al con tracts, all or ders are sub ject to the cur rent ver si on of the ge ne ral terms and con di ti ons of wrth elek tro nik ei sos group, last ver si on availa ble at www. we- on li ne. com. j im port ant no tes: the fol lo wi ng con di ti ons ap p ly to all goods wi thin the pro duct ran ge of wrth elek tro nik ei sos gmbh & co. kg: this elec tro nic com po nent has be en de si gned and de ve lo ped for usa ge in ge ne ral elec tro nic equip ment on ly. this pro duct is not au t ho ri zed for use in equip ment whe re a hig her sa fe ty stan dard and re lia bi li ty stan dard is espe ci al ly re qui red or whe re a fai lu re of the pro duct is re a so na b ly ex pec ted to cau se se ve re per so nal in ju ry or death, un less the par ties ha ve exe cu ted an agree ment spe ci fi cal ly go ver ning such use. mo reo ver wrth elek tro nik ei sos gmbh & co kg pro ducts are neit her de si gned nor in ten ded for use in are as such as mi li ta ry, ae ro space, avia ti on, nucle ar con trol, sub ma ri ne, trans por ta ti on (au to mo ti ve con trol, train con trol, ship con trol), trans por ta ti on si gnal, di sa ster pre ven ti on, me di cal, pu blic in for ma ti on net work etc. . wrth elek tro nik ei sos gmbh & co kg must be in for med about the in tent of such usa ge be fo re the de sign- in sta ge. in ad di ti on, suf fi cient re lia bi li ty eva lua ti on checks for sa fe ty must be per for med on eve ry elec tro nic com po nent which is used in elec tri cal cir cuits that re qui re high sa fe ty and re lia bi li ty fun c ti ons or per for man ce.
|
